Document No. 6957-193 June 2006 Revision 2.3 ©Copyright Stoneridge Electronics Ltd
Manufacturers of VEEDER-ROOT Tachographs
10
2.6.2 Diagnostics Menu - Operation of Functions
With the Programmer OFF, press and hold the
ENTER key and switch the device ON.
To prevent unintentional use of the
Diagnostic functions, a pass code will be
requested. Type in 8642, and press
ENTER. By pressing the
←
←
←
←
or
→
→
→
→
keys the
required function may then be displayed.
Enter PIN
:8642
Language Select -
Press ENTER and the
current language and the characters
←
→
will
be displayed (on the right of display).
Press the required key (
←
or
→
) until the
required language is shown and then press
ENTER again to make the selection
permanent.
DIAGNOSTICS MENU
:Language Select
The language selected will then be used for all
the operating menus until a different language
is selected.
Press MENU once to return to the
DIAGNOSTICS MENU.
SELECT LANGUAGE
:English
←
←
←
←
→
→
→
→
Set time & date
- Press ENTER and type in
the
time
in the format shown on the screen.
Press ENTER after setting the time to set the
date
in the format shown on the screen.
When the time and date have been set, press
ENTER to confirm the settings.
Note : The time entered should be UTC time.
DIAGNOSTICS MENU
:Set time & date
Time: HHmm
:09:45
Date: ddMMyyyy
:01/07/2003
Fixed Dist leng
– Press ENTER to display the
Fixed Distance Length.
Press ENTER to change the distance (Note:
Range is 20 to 1000m). Enter the distance
required and press the ENTER key to accept.
Press MENU to return to the Diagnostic Menu.
DIAGNOSTICS MENU
:Fixed Dist leng
Enter distance
:20 m
Hardware Test
– This test is to be applied by
the manufacturer only.
DIAGNOSTICS MENU
:Hardware Test
Keyboard Test
- Press ENTER and then
DIAGNOSTICS MENU
