Veeder-Root HydrX, Руководство по установке

Страница: 17 / 39

Installation Water Intake Device Installation
13
Water Intake Device Installation
1. Get the Water Intake Device (WID) assembly from the kit. The WID length and tube configuration was
determined by measurements made in the HydrX Site Inspection Guide.
2. At the Guide Tube flange uncoil the WID tubing assembly while pushing the tube’s metal rectangular end
down into the Guide Tube flange (see Figure 8). Continue uncoiling/pushing the tubing assembly down until
the WID flange seats against the Guide Tube flange. Since the Guide Tube is locked in the desired direction,
the WID tubing’s rectangular end will follow the desired path to the middle of the tank’s low end.
Figure 8. Installing WID
3. Secure the WID flange onto the Guide Tube flange with the 3 bolts from the kit.
Figure 9. Securing WID Flange To Guide Tube Flange