Introduction
Available Parts
2
•
Pulser Capacity:
0 - 1000 rpm (0-1667 Hz)
•
Temperature compensation range:
-40 to +158°F (-40 to +70°C)
•
Communication between Display Head and IB:
RS-485; 2-wire half duplex; custom protocol; 115,200
baud; 8 bit; no parity; 1 stop bit
•
Communication between Printer and IB:
RS-232; 9600 baud; 8 bit; no parity; 1 stop bit
•
Display Head Operating temperature range:
-40 to +140°F (-40 to +60°C)
•
IB Operating temperature range:
-13 to +104°F (-25 to +40°C)
•
Display Head and IB Storage temperature range:
-40 to +185°F (-40 to +85°C)
•
Printer power:
+24 Vdc, 2 A (supplied by the IB)
•
Printer Operating temperature range:
+32 to +122°F (0 to +50°C)
•
Printer Storage temperature range:
+32 to +122°F (0 to +50°C)
•
Weights and Measures:
Designed to meet NIST, OIML, Australian and Canadian W&M specifications.
•
Relay Ratings:
5A at 120 Vac, 2.5A at 240Vac, 5A at 24 Vdc
•
Vibration:
MIL-STD-810G, Method 514.6; Table 514.6 C-VI Category 4
•
Shock:
MIL-STD-810G, Method 516.6; 20G, 11ms, 1/2-Sine
Available Parts
All available EMR4 system parts, including options, are listed below.
• Display Head (P/N 84559X-XXX) - standard
• Keypad Group (P/N 845900-014) - optional
• Bracket with internal V-R Encoder Installation Kit (P/N 845900-015) - included with Display Head
• C&C Corner Switch Group, Normally Open (P/N 845900-018) - included with Display Head
• Slip Printer Kit (10 feet [3.04m] cable included) (P/N 845900-020) - optional
• Temp Probe Kit (P/N 845900-002) - replacement
• Thermowell group - UL/cUL Listed, 350 psi working pressure, Canadian W&M Approved (P/N 0331373-001)
• Interconnect Box (P/N 8457XX-XXX) - standard
• Display Head Hookup Cable: 4-conductor cable from 6 to 1000 feet (1.83 to 152.4 m) lengths (P/N 846000-
1XX)
• Emergency Stop Switch (ESS) Kit (P/N 845900-021) - optional
• Remote Display Head (P/N 84559X-002) - optional
• Remote Display Bracket Install Kit (P/N 845900-024) - optional
• RS-232 Cable Kit (P/N 330020-432 [10 feet {3.04 m}]) - optional
• Top Mount Remote Pulser Kit (P/N 845900-504) - optional
• Front Mount Remote Pulser Kit (P/N 845900-505, 845900-506) - optional
• Epson TM-U220A Roll Printer Only (Cable in separate kit) (P/N 845900-067)
• Printer Cable Kit - 10 feet (3.04 m) (845900-013) - optional
• Printer Cable Kit - 35 feet (10.67m) (845900-071) - optional
