Vectron SteelTouch II, Руководство пользователя

Страница: 24 / 98

24
V EC T RON POS S T EELTOUCH II
You should protect yourself against undesired changes of
the above mentioned parts of programming. This can be
achieved by using operator keys, RFID cards and pass-
words. Each operator should be assigned his required
authorization in the rights table of the POS system. Ope-
rator keys and RFID cards, which enable these rights, must
exclusively be accessible to the respective operators. The
passwords must exclusively be known by the respective
operators.
Operator rights must be assigned thoroughly, since ope-
rators - depending on their rights - can change or delete
data, configuration and programming of SteelTouch II.
These changes can cause you financial damage or lead to
penal consequences, for instance if the stored data does
no longer comply with demands of the fiscal authorities.
The operating company of SteelTouch II is responsible
for assigning the operator rights. Prior to starting, your
Vectron dealer should draw up a concept for the assign-
ment of operator rights together with you. Each operator
of SteelTouch II should exclusively be granted the rights he
requires.
Your Vectron dealer is responsible for programming and
configuration of the SteelTouch II. Vectron advises you not
to modify the programming and configuration yourself.
Please contact your Vectron dealer for any questions and
demands concerning programming and configuration.
SteelTouch II and the power supply Vectron PS30 must be
operated under ambient conditions as described in chap-
ter “4.4. Technical data” on page 26. The SteelTouch II
must not be set up in the open.
The touch screen must exclusively be touched with touch
pen or fingers.