User manual
Vectron
© Höft & Wessel AG
page 37/70
Lin
02.02.2001
1.00
HW90195UserMan.doc
Subject to amendment, errors excepted
6.2.2 Function indication LEDs
A list of all LED-combinations will be shown in the following.
The green LED usually indicates the accu charging condition:
•
on
=
„ok“,
•
flashing = „low“ oder „discharged“.
The red LED indicates several error conditions:
•
off = „ok“,
•
on = „no paper“ resp. „open casing flap“,
•
flashing = „no radio connection“.
Additionally, the green LED flashes every 2 seconds, if the printer is at sleep mode. Update processes
and the inital switch on from „off-mode“ are the exceptions.
Printer mode
accu charg-
ing cond.
Status paper/
casing flap
Status radio
connection
green LED
red LED
OFF
-
-
-
aus
off
SLEEP
-
-
-
flash (ca. 0,5Hz) off
ON
ok
ok
ok
on
off
ON
ok
Error
-
on
on
ON
ok
ok
Error
on
flash (ca. 2Hz)
ON
low / discharg. ok
ok
flash (ca. 2Hz)
off
ON
low / discharg. Error
-
flash (ca. 2Hz)
on
ON
low / discharg. ok
Error
flash (ca. 2Hz)
flash (ca. 2Hz)
Update / trans-
mission
-
-
ok
flash (ca. 0,5Hz
at block size of
1kByte)
off
Update / pro-
gramming
-
-
ok
off
on
Tab. 1: optical indication of printer mode
6.2.3 Acoustic signals
The printer generates acoustic signals during certain operations.
Operation
acoustic signal
Switch on of printer with on/off-key.
Double whistle sound.
Printer turns to sleep mode.
Whistle sound after app. 5 s (radio connection has
been interrupted).
radio connection is interrupted.
Whistle sound as error indication.
Printer recieved command to read magnetic
card.
Beep sound as request to pull magnetic card through
slot of reading unit.
Magnetic card has been pulled through slot of
reader unit.
Beep sound after having pulled a magnetic card
through slot of reader unit.
