VECTRIX ZEV OWNER’S MANUAL
3
. Main/DippeD BeaM SWiTCh
This switch allows the user to switch from high
to low beam. Push up to select low beam to high
beam or push down to select high beam to low
beam.
. Main-BeaM paSS SWiTCh
This switch is used to let other drivers know that
you are passing. Pulse the switch to flash your
main beam. The switch is located on the back
side of the handlebar.
3. lefT/riGhT DireCTiOn SWiTCh
To engage the turn signal, move the switch to
the right to signal a right hand turn and move the
switch to the left to signal a left hand turn. Push
the button back to reset the switch. If a directional
is left on for more than 20 seconds and the bike
is moving, the horn will chirp to alert the rider that
the directional is still active.
Main/Dipped Beam
Switch
Main-Beam pass
Switch
left/right
Direction Switch
4. hOrn SWiTCh
By tapping the horn you will hear a chirping noise
to alert people you are coming. Or, if you hold
onto the horn switch, it will first chirp and then
make a louder sound.
horn Switch
4
3
lEFT handlEBar sWiTchEs
noTE!
Always use turn signals to make other motorists
aware of your intentions.