Vectornav VN-200, Быстрый старт

Страница: 9 / 18

9
10-0003-R3
Copyright © 2019 VectorNav Technologies, LLC
Configuring the VN-200 in
Control Center
All VN-200 configuration registers can be set within Control Center using
the various dropdown items in the Config Registers View and stored in
non-volatile memory using the Write Settings command. The VN-200
will automatically startup in the configuration that was set when a Write
Settings command was issued. A Restore Factory Settings command will
reset the configuration to the default settings.
A copy of the Control Center GUI is included on the CD in the VN-200
Development Kit. Please also regularly check our website for the latest
version of the software.
http://www.vectornav.com/support/downloads
The following steps provide an example of how to connect to the VN-
200, configure the VN-200 output data, input the GNSS Compass
measurements, and view the VN-200 INS Status message through
startup and operation.
Some INS Filter configuration settings require a Reset command
after issuing a Write Settings command before taking effect.