www.vectorfog.com
06
CLEANING
INSTRUCTIONS
WHEN USING WATER BASED LIQUIDS
When fogging is complete, pour any liquid left in the tank to a suitable container
using a funnel.
STEP A
Operate the fogger for 1 minute with the nozzle opened to the largest droplet size
setting. This will get rid of any existing liquid remaining in the fogger's internal
tubes.
STEP B
Fill the fogger with some clean water and operate again for one minute.
Remove any excess water from the tank.
STEP C
WHEN USING EMULSIONS
After fogging, begin with
STEP A
as listed above. Once done, fill the tank with
appropriate solvent for the chemical that was used. Repeat
STEP B
, flushing any
chemical residuals left inside. Then repeat
STEP C
. Before storing, allow the tank to dry.
PLEASE CLEAN THE FOGGER AFTER EACH USE!
WARNING
