The battery charger is for AC 110V — 240V power supply/60Hz.
Unplug the charger after the battery is fully charged (green light).
Do not fill the solution tank with powder, viscous liquid and flammable solution
such as strong acid, strong alkaline, petrol, etc.
Do not disassemble, modify, or alter the charger and the machine.
Modifications or alterations will invalidate the warranty.
Please wear safety equipment (mask, anti-contamination clothing, gloves, etc.)
while using noxious material.
When using the machine inside vehicles, secure the position of the machine to
prevent electric shocks and chemical teaks.
Do not lean the machine on its side with chemical inside the tank.
This can cause chemical leaks resulting into faulty machine.
Do not inhale the cold fog generated from the machine. The micro-droplets
produced by this machine can float in the air for a long time and are quickly absorbed
by the lungs. Depending on the chemical being used, this could result in
serious injuries or death.
The charger is not waterproof. Do not use or store this in humid atmosphere
or wet places.
Do not use any damaged power cord, plug, charger or socket.
Do not fill in the solution tank while charging the battery.
Do not drop, heat, cut, or disassemble the machine.
Do not use the machine close to combustible or inflammable materials.
Only use the designated charger to charge the battery.
Do not charge or store the machine over 95°F (35°C) or under 50°F (10°C).
Do not expose and use the machine over 104°F (40°C).
Do not touch the plug, charger or switch with wet hands.
1
15
13
9
8
14
10
4
2
If the machine or the charger is faulty, please contact the supplier.
16
12
6
7
11
5
3
SAFETY
PRECAUTIONS
www.vectorfog.com
01
