AI4.MUen.01
Vecteur Ai4 Owner’s Manual
Page : 5/8
Amplifier Description
Item Name
Function
1
Power On/Off
The button has 2 positions. Pushed and ejected. When pushed, the
unit is on, when ejected the power is off
2
Remonte Control receiver
window
Used to receive the IR remote control transmission signal.
3
Source/input selection
Used for selecting the input signal connected to the rear panel
terminals. There are 5 input signal terminals for selection .By
pressing one selection button, corresponding input signal goes into
the amplifier, and then the corresponding input signal light is lit
4
Phone plug
Used for stereo headphone/earphone with 6.35mm plug. Once plug
in, the unit output to speakers will be switched off.
5
Volume control knob
Volume adjustment: when you turn the knob clockwise, volume
increases, counter clockwise, it is reduced.
6
CD input terminal
Used to connect signal coming from a CD player
7
DVD input terminal
Used to connect signal coming from a DVD player
8
Aux 1/Aux 2 input
terminal
Used to connect signal input coming from any source matching input
terminal specifications, e.g. any audio signal coming from a source
such as Hifi VCR, TV set…
9
Signal output (REC OUT)
Used for signal output similar to the selected input signal, to be send
to a recorder or another audio system as a source.
10
Speaker out left
Connection of left speaker cable
11
Speaker out right
Connection of right speaker cable
12
Voltage selection
Used to switch from 220 V to 110 V
13
AC power input
Connection of AC power cord and fuse
12
1
2
4
5
6
3
7
8
11
10
9
13
