13
©Vecow SPC-5600 User Manual
GETTING TO KNOW YOUR SPC-5600
Using suitable RJ-45 cable, you can connect the system to a computer, or to any
other devices with Ethernet connection, for example, a hub or a switch. Moreover,
both of LAN 1 and LAN 2, LAN 3, LAN 4 supports Wake on LAN and Pre-boot
functions. The pin-outs of LAN 1 and LAN 2, LAN 3, LAN 4 are listed as follows :
Pin No.
10/100 Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
------
MDI2_P
5
------
MDI2_N
6
E_RX-
MDI1_N
7
------
MDI3_P
8
------
MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED
indicators to present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid
green when the cable is properly connected to a 100Mbps
Ethernet network; The LED indicator on the right bottom corner
lightens in solid orange when the cable is properly connected to a
1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
1
8
LED Location
LED Color
10Mbps
100Mbps
1000Mbps
Right
Green/Orange
Off
Solid Green
Solid Orange
Left
Yellow
Twinkling Yellow Twinkling Yellow Twinkling Yellow
2.2.8 Remote Power On/Off Switch
It is a 2-pin power-on or power-off switch through
Phoenix Contact terminal block. You could turn on or off
the system power by using this contact. This terminal
block supports dual function of soft power-on/power-off
(instant off or delay 4 second), and suspend mode.
DVI-D
COM 1
COM 2
DP
DP
Switch
On | Off
LAN 3
LAN 4
LAN 1
LAN 2
Pin No. Definition
1
SW+
2
SW-
