77
GETTING TO KNOW YOUR SPC-3000/3500
2.4.5 JUSB1, JUSB2 : Internal USB2.0 Connector
The SPC-3000 main board provides maxima eight expansion USB ports. The
USB interface supports 480 Mbps transfer rate which comply with high speed
USB specification Rev. 2.0.
The USB interface is accessed through one 10-pin JST 1.0mm connector. You
will need an adapter cable if you use a standard USB connector. The adapter
cable has a 10-pin connector on one end and a USB connector on the other.
The pin assignments of JUSB1 and JUSB2 are listed in the following table:
Connector
Pin No.
Description
Pin No.
Description
JUSB1
1
USB_VCC
6
USB_D_5N
2
USB_VCC
7
USB_D_5P
3
USB_VCC
8
GND
4
USB_D_4N
9
GND
5
USB_D_4P
10
GND
2
1
2
10
1
9
JUSB1
JUSB2
Содержание SPC-3000
Страница 106: ...99 HARDWARE INSTALLATION Step 3 Remove two F M3x4 screws Step 4 Take off the bottom side...
Страница 110: ...103 HARDWARE INSTALLATION Step 3 Fasten the washer 3 5 Installing SIM Card Step 1 Open the SIM card cover...
Страница 112: ...105 HARDWARE INSTALLATION Step 3 Install SATA cable with SSD HDD Step 4 Close the bottom side...