Copyright © Vecow Co., Ltd. All Rights Reserved. SPC-2000 Series Ultra-compact Embedded System User
Manual
20
GETTING TO KNOW YOUR SPC-2000
2.8
Dual PoE LAN Connector
The 10/100/1000 Mbps Ethernet LAN ports 1 and 2 use 8-pin RJ-45 connector. LNA 1 and LAN 2
are equipped with Intel I210 LAN chip. Using suitable RJ-45 cable, you can connect SPC-2000
system to a computer, or to any other piece of equipment that has an Ethernet connection, for
example, a hub or a switch. Moreover, both of them have Wake-on-LAN and Preboot Execution
Environment capabilities. The following diagram shows the pinouts for LAN 1 and LAN 2 port.
Pin Number 10 / 100 Mbps
1000 Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
The Ethernet ports use standard RJ-45 jack connectors with LED indicators on the front side to
show Active/Link status and Speed status.
The LED indicators on the right bottom corners glow a solid green color when the cable is
properly connected to a 100 Mbps Ethernet network. The LED indicator on the left bottom
corner will flash on and off when Ethernet packets are being transmitted or received.
