
61
GETTING TO KNOW YOUR RCS-9000
There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections on the front side of RCS-9000. LAN 1 is powered by Intel
®
I219LMLM Ethernet engine, and LAN 2 is powered by Intel I210 Ethernet
engine. When LAN 1 works in normal status, iAMT 11.0 function is enabled.
When LAN 2 works in normal status, iAMT 8.0 function is enabled.
Using suitable RJ-45 cable, you can connect the RCS-9000 system to a
computer or to any other devices with Ethernet connection, for example, a hub
or a switch. Moreover, both LAN 1 and LAN 2 support “Wake” on LAN and pre-
boot functions. The pinouts of LAN 1 and LAN 2 are listed in the following chart:
Each LAN port is supported by a standard RJ-45 connector
with LED indicators to present active/link/speed statuses
of the connection. The LED indicator on the right bottom
corner becomes solid green when the cable is properly
connected to a 100Mbps Ethernet network; it becomes
solid orange when the cable is properly connected to a
1
8
1000Mbps Ethernet network. The left LED will keep blinking off when Ethernet
data packets are being transmitted or received.
Pin No.
10/ 100Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
LED Location
LED Color
10Mbps
100Mbps
1000Mbps
Right
Green/
Orange
Off
Solid Green
Solid Orange
Left
Yellow
Blinking
Yellow
Blinking
Yellow
Blinking
Yellow
Содержание RCS-9000
Страница 116: ...107 HARDWARE INSTALLATION 3 7 2 Internal SIM Card Step 1 Open the top cover so you can see the SIM slot Step 2 Finish...
Страница 124: ...115 HARDWARE INSTALLATION Step 7 Install power and sata cable with SSD HDD Step 8 Install four F M3x4L screws...
Страница 168: ...159 Appendix F F 1 How to Install Power Supply PWS 480W WT PWS 600W...