
132
BIOS AND DRIVER SETTING
©Vecow RCS-9000 User Manual
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN
cannot be disabled if ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state).
S0 State: Always turn-on the system when power source plugged-in.
S5 State: Always turn-off the system when power source plugged-in.
DMI Link ASPM Control
Enable/Disable the control of Active State Power Management on SA side of
the DMI Link.
Native PCIE Enable
PCIE Express Native Support Enable/Disable.
Intel
®
Ethernet Controller I210
Bios options for PCIe device on Intel® Ethernet Controller I210 LAN
miniPCIe Slot 1~3
Bios options for PCIe devices on miniPCIe Slot.
PCI Express x4 Slot
Bios options for PCIe device on PCI Express x4 Slot
4.4.2.1 PCI Express Configuration of PCH-IO
Figure 4-4-2-1: PCH-IO Settings
Содержание RCS-9000
Страница 116: ...107 HARDWARE INSTALLATION 3 7 2 Internal SIM Card Step 1 Open the top cover so you can see the SIM slot Step 2 Finish...
Страница 124: ...115 HARDWARE INSTALLATION Step 7 Install power and sata cable with SSD HDD Step 8 Install four F M3x4L screws...
Страница 168: ...159 Appendix F F 1 How to Install Power Supply PWS 480W WT PWS 600W...