Vecow ECX-2200A, Руководство пользователя, Страница: 57 / 168

48 ©Vecow ECX-2200A/2100A User Manual GETTING TO KNOW YOUR ECX-2200A/2100A
2.3.5 PoE Ports
2.3.5.1 ECX-2200A
There are 4 RJ45 connectors in the rear side of ECX-2200A/2200MA. It supports
IEEE 802.3at (PoE+) Power over Ethernet (PoE) connection delivering up to
30W/54V per port and 1000BASE-T gigabit data signals over standard Ethernet Cat
5/Cat 6 cable.
Each PoE connection is powered by Intel
®
I210 Gigabit Ethernet controller and
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 and LAN 6 are listed as follows :
Pin No. 10/100 Mbps 1000Mbps PoE
1 E_TX+ MDI0_P PoE+
2 E_TX- MDI0_N PoE+
3 E_RX+ MDI1_P PoE-
4 ----- MDI2_P -----
5 ----- MDI2_N -----
6 E_RX- MDI1_N PoE-
7 ----- MDI3_P -----
8 ----- MDI3_N -----
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the left bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network; The LED indicator
on the left bottom corner lightens in solid orange when the cable is properly
connected to a 1000 Mbps Ethernet network; The right LED will keep twinkling
yellow when Ethernet data packets are being transmitted/ received.
V+ V
DC-IN IGN On / Off
COM 1 COM 3
COM 2 COM 4
LAN 3
PoE+
LAN 4
PoE+
LAN 5
PoE+
LAN 6
PoE+
Isolated DIO2
D I PIN 1 ~ 8 DO PIN 11 ~ 18
20 11
10 1
Isolated DIO1
D I PIN 1 ~ 8 DO PIN 11 ~ 18
20 11
10 1