87
BIOS AND DRIVER SETTING
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controller(s) operate.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or
disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
SATA Controller Speed
Indicates the maximum speed the SATA controller can support.
Options for each SATA port:
Port 0
Enable or disable SATA Port.
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
SATA Device Type
Identifies that the SATA port is connected to solid state drive or hard disk drive.
4.3.11 Acoustic Management Configuration
Acoustic Management Configuration
Option to enable or disable automatic acoustic management.
Figure 4 3-11: Acoustic Management Settings
Содержание ECS-9101
