28
GETTING TO KNOW YOUR ECS-4500
©Vecow ECS-4500 User Manual
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection & POE status LED.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network, and it lightens in
solid orange when the cable is properly connected to a 1000 Mbps Ethernet
network. The left LED will keep twinkling/ off when Ethernet data packets are
being transmitted/received.
1
8
LED Status
10Mbps
100Mbps
1000Mbps
Right
Bottom Led
Off
Solid
Green
Solid
Orange
Left
Bottom Led
Flash
Yellow
Flash
Yellow
Flash
Yellow
2.3.5 PoE (Power over Ethernet) Ports
There are 4-port 8-pin PoE
+
(Power over Ethernet) RJ-45 jacks supporting
10/100/1000 Mbps Ethernet connections in the rear side and powered by Intel
I210 Ethernet engine. When both LAN 1 and LAN 2 work in normal status, iAMT
11.0 function is enabled. (Each PoE support 30.4W/ 54V)
When using suitable RJ-45 cable, you can connect the system to a computer, or
to any other devices with Ethernet connection; for example, a hub or a switch.
Moreover, all of LAN3, LAN4, LAN5 and LAN6 support Wake on LAN and Pre-
boot functions. The pin-outs of LAN3, LAN4, LAN5 and LAN6 are listed as
follows:
Pin No.
10/ 100 Mbps
1000 Mbps
PoE
1
E_TX+
MDI0_P
PoE+
2
E_TX-
MDI0_N
PoE+
3
E_RX+
MDI1_P
PoE-
4
----
MDI2_P
----
5
-----
MDI2_N
----
6
E_RX-
MDI1_N
PoE-
7
-----
MDI3_P
----
8
------
MDI3_N
----
COM1
COM3
COM2
COM4
V+ V
IGN
On | Off
DC-IN 6~36V
LAN3
LAN4
LAN5
LAN6
PoE+
Isolated
DIO
20
11
3
4
5
6
10
1
D I
PIN 1 ~ 8
DO
PIN 11 ~ 18
USB 3.0
