53
GETTING TO KNOW YOUR IVH-7700
6
5 seconds
60 seconds
7
5 seconds
90 seconds
8
5 seconds
30 minutes
9
5 seconds
1 hour
A
10 seconds
2 hours
B
10 seconds
4 hours
C
10 seconds
6 hours
D
10 seconds
8 hours
E
10 seconds
12 hours
F
10 seconds
24 hours
2.6.2 Ignition Control Wiring
To activate ignition control, you need to provide IGN signal via the 3-pin
pluggable terminal block locates in the back panel. Please find below the
general wiring configuration.
V+
: Positive polarity of DC power input
(Car for 12/24/48V)
V-
: Ground of DC power input
(Car battery -/GND line to GND)
IGN
: Ignition signal input
(ACC power of vehicle)
For testing purpose, you can refer to the picture
blow to simulate ignition signal input controlled by
a latching switch.
