Vecom EPBC-1000, Руководство пользователя

Страница: 45 / 73

39 ©Vecow EPBC-1000 User Manual BIOS SETUP
4.3.14 Network Stack Configuration
Figure 4-3-14 : Network Stack Configuration
Network Stack
Enable/Disable UEFI Network Stack.
IPv4 PXE Support
Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will
not be available.
IPv4 HTTP Support
Enable/Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot support
will not be available.
IPv6 PXE Support
Enable/Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will
not be available.
IPv6 HTTP Support
Enable/Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot support
will not be available.
PXE boot wait time
Wait time in seconds to press ESC key to abort the PXE boot. Use /- or
numeric keys to set the value.
Media detect count
Number of times the presence of media will be checked. Use /- or
numeric keys to set the value.
USB Mass Storage Driver Support
Enable/Disable USB Mass Storage Driver Support.
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
USB mass storage device Start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.