Vecom ECS-8000, Руководство пользователя

Страница: 27 / 101

20
GETTING TO KNOW YOUR ECS-8000 ©Vecow ECS-8000 User Manual
Pin No. 10/ 100Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ---- MDI2_P
5 ----- MDI2_N
6 E_RX- MDI1_N
7 ----- MDI3_P
8 ------ MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection. The LED indicator on the
right bottom corner lightens in solid green when the cable is properly connected
to a 100Mbps Ethernet network; The LED indicator on the right bottom corner
lightens in solid orange when the cable is properly connected to a 1000Mbps
Ethernet network; The left LED will keep twinkling/ off when Ethernet data
packets are being transmitted/ received.
2.2.10 10/ 100/ 1000 Mbps Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side and rear side of ECS-8000. LAN 1 is powered by
Intel
®
I218LM Ethernet engine; LAN 2 is powered by Intel I210 Ethernet engine.
When both LAN 1 and LAN 2 work in normal status, basic iAMT function is
enabled. Using suitable RJ-45 cable, you can connect ECS-8000 system to a
computer, or to any other devices with Ethernet connection, for example, a hub
or a switch. Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and
Pre-boot functions. The pinouts of LAN 1 and LAN 2 are listed as follows:
Reset HDD
PWR
DVI-D
VGA
2
1
LAN 2 LAN 1
CFast
SIM 1 SIM 2
1 2 3 WLAN
WWAN