Vecima VistaMax OBR3500, Инструкция по установке и эксплуатации

Страница: 15 / 56

obr3500_ml_01_sd Approved: C.H.
2-5
Once the OBR3500 is mounted to the pole, the Elevation Angle may be adjusted as necessary and the unit may be
connected to the network via a CAT5E cable with a standard RJ45 connector on one end and a special Molex®
backshell with RJ45 connector on the other end — See
“2.2 Water Proofing and Strain Relief" for adding strain relief
and water proofing the network connection.
NOTE
If not using a pre-made cable assembly (such as a CAT5CABLE/OD/25, CAT5CABLE/OD/50,
CAT5CABLE/OD/75 or CAT5CABLE/OD/10 from Vecima Networks), then a cable assembly will have to
made using the Molex® backshell included with the OBR3500. Please see Appendix 1 for details on how
to install the Molex® backshell.
Figure 2-5 Connecting the OBR3500 to the Network
µWRµ
7RFRQQHFWWKH(WKHUQHWFDEOHLQVHUW
DQGWZLVWFORFNZLVHWRORFNLQWRSODFH
&RQQHFWWKHRWKHUHQGRIWKH(WKHUQHWFDEOH
LQWRWKHQHWZRUNYLDVXUJHVXSSUHVVRU
DVVSHFLILHGLQVHFWLRQ
7RDGMXVWWKHHOHYDWLRQDQJOHRI
WKH2%5ORRVHQWKHVHIRXU
VFUHZVDQGWLJKWHQZKHQWKH
GHVLUHGDQJOHLVDFKLHYHG