TUF1010 and TUF1005 -usm. rev.00
© 2020 VebaBox B.V. User Manual TUF1005
6
Before starting the VebaBox ,make sure that the power supply line and the plug are dry.
Do not place any electrical devices connected to a live electric power source inside the
cooling container.
Set up the VebaBox in a dry location where it is protected against splashing water. Protect
the VebaBox and the cable against rain and moisture. Do not place it near open flames or
other heat sources (heaters, direct sunlight, gas ovens etc.).
CAUTION:
Danger of overheating! Always make sure there is sufficient
ventilation so that heat generated during normal operation can dissipate.
Ensure that the ventilation slots are not covered.
Leave at least 100 mm free from the top and around the VebaBox to ensure adequate
ventilation.
Never immerse the VebaBox in water. Do not fill the inner container with ice or fluid.
IMPORTANT:
VebaBox cannot be held liable for claims
for damage resulting from the following:
• Misuse, improper installation, abnormal servicing, storage of
hazardous chemicals, use of corrosive substances, transit damage,
recharging of cooling system, accident, fire, improper repair, tampering
or abuse.
WARNING:
Always wear goggles or safety glasses when working with or
around the refrigeration system or battery. Refrigerant or battery acid can cause
permanent damage if it comes in contact with your eyes.
WARNING:
Control circuits (except of 110 – 230V AC power supply input)
used in the VebaBox are low voltage. This voltage potential is not considered life
threatening, but the large amount of current available can cause severe burns if shorted
to ground.
WARNING:
Do not wear jewelry, watches, or rings. These items can shortcut
electrical circuits and cause severe burns to the wearer.