VEAB CV MTC Series, Руководство пользователя

Страница: 5 / 20

CV..-..-.MTC/MTCL-.MQC/MQCL
5
Safety Information
1. This appliance may be used by children aged eight years or above, people with physical and
mental disabilities as well as those who lack any experience, provided that they have received
detailed instructions about the functionality of the appliance and any risks.
Children must not play with the appliance. Cleaning and maintenance must not be performed by
children without proper supervision.
Children under three years of age should not be near the appliance without constant supervision.
Children between three and eight years old may only turn on/shut off the appliance if it is located
in a suitable position and they have received instructions about the proper course of action, or are
being supervised. They shall also be informed about possible dangers.
Children between three and eight years old may not connect the device, change its settings or
perform care/maintenance.
2. All installation work must be carried out by a qualified technician.
3. The heater’s data for voltage and output are shown on the specification plate on the outside of
the cover. The wiring diagram is mounted on the inside of the cover.
4. Max. permitted ambient temperature is +30°C. Max. permitted output air temperature is +50°C.
5. The heater must be connected to the electricity grid with a fixed cable. An omnipolar switch
must be included in the fixed installation. Conduit entries must be of a type that allows the
heater’s ingress protection class to be retained. The heater’s IP class is stated on the specification
plate.
The connection cable that enters the junction box must be adapted to the relevant installation.
6. The heater must be installed in such a way that it interlocks with the fan or air stream passing
through the heater. The power supply to a heater without flow interlock cannot be started unless
the fan starts simultaneously or in advance. It must also be impossible to turn off the fan without
interrupting the heater’s power supply.
7. The air speed through a heater without flow interlock must be at least 1.5 m/s.
8. The heater has CE marking and is produced in accordance with EN 60335–1/EN 60335–20/
EN 61000-6-2/EN 61000-6-3/EN 62233.
9. Never attempt to open the heater while it is connected to mains electricity.
10. The heater surfaces may be hot.