VEAB Heat Tech Robust C, Инструкция по установке и эксплуатации

Страница: 6 / 40

ROBUST - C
6
Application
The fan heater is approved for use in damp and wet areas and may be used in corrosive environments, such as car
washes and sewage treatment plants. The fan heater is portable, but can also be permanently installed. If the fan heater
is permanently installed, an isolating switch with a contact gap of at least 3 mm must be provided. The fan heater must be
easily accessible for cleaning and service.
The fan heater has been tested for electrical safety and has been EMC tested by SEMKO. The fan heater is CE marked.
Degree of protection: IP65.
Accessories
RTC control unit with 0–35°C thermostat and selector switch for remote control, e.g. if the fan heater is installed
high up on a wall (see wiring diagram on the cover).
Operation
Set the selector switch to the required output or to fan-only operation. Set the required room temperature on the
thermostat, which controls the preset heat output. The fan runs continuously.
Selector switch
1. Fan only
2. Fan + 1/2 output (2/3 output for the 3kW Robust C)
3. Fan + 1/1 output
Thermostat, 0-35°
4. Thermostat
Service/Maintenance
Clean the fan heater at regular intervals, since dust and dirt may cause overheating and give rise to the risk of fire. If used
in a car wash plant, the fan heater should be washed (N.B. not at high pressure) once a week using a sponge and mains/
sweet water, in order to avoid salt deposits. The fan heater has a built-in temperature limiter with manual reset, which
is intended to trip the power supply in the event of overheating. If the temperature limiter has tripped, isolate the power
supply to the fan heater, let the heater cool down, and then correct the fault. Service work should be carried out by a
competent person.
Technical specification of the Robust C
Robust
model
Total
power
(W)
Heat
output
(W)
Motor
rating
(W)
Control steps
(kW)
Voltage Current
(A)
Air flow
rate
(m³/h)
Air temp.
rise.
(°C)
Weight
(kg)
C3 3065 3000 65 0-2-3 230 V~ 9,1/13,5 400 21 11
C6N 6070 6000 70 0-3-6 230 V3~ 7,8/15,4 1000 17 19
C6 6080 6000 80 0-3-6 400 V3~ 4,5/8,9 1000 17 19
C9N 9070 9000 70 0-4,5-9 230 V3~ 11,6/22,9 1000 25 19
C9 9080 9000 80 0-4,5-9 400 V3~ 6,7/13,2 1000 25 19
C15 15100 15000 100 0-7,5-15 400 V3~ 11,2/22 1300 32 20
2
3
1 4