AW 12s-62s, 12a-62a
12
3. The fan heater may be fitted with the pipes facing to the left or to the right, as seen from the front, as in
photos 7 and 8. In rooms with high ceilings, the fan heater should be installed in a low position, but not so low that
it intrudes on the working space. For a template for drilling the holes for the wall brackets, and minimum distances
from floor, ceiling and walls, see appendix C.
4. The fan heaters are delivered with the air deflector fitted for mounting as in photo 7.
If the fan heater is mounted with the pipes facing right, the air deflector grille must be turned so that the air is
deflected downwards. Unscrew the six screws that hold the air deflector as in photo 9, and take off the deflector and
turn it 180°. Then screw it back on.
5. Mount the fan heater acc. to photo 10 when mounting it on a ceiling for a vertical air stream. The minimum
distance to the wall must be 700 mm. If the fan heater is mounted on a ceiling, near a corner, the minimum
distance to one wall must be 700 mm and to the other wall 2000 mm.
Fitting the AWT ceiling brackets
1. Unscrew the metal sheet screws on the fan heater, as in photo 11 (four screws each on the AW42 and the AW62).
2. Fit the ceiling brackets as in photo 12.
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
Содержание AW Series
