Vdwall LVP615U, Руководство пользователя

Страница: 83 / 112

LVP615U
使用说明
83
pop up the message “Configuration is successful”. Click “Set” button respectively in input
and output field, the software will automatically save the parameters that it worked out in
current processor.
Caution: both input and output parameters of LVP615U must be even, but the
results of auto calculation may be odd, if so, it is necessary to set an adjusted
value to correct the parameters to be even, then you can click “Set” to save it.
(5)Parameters configuration of other processors.
Connect other processors to be set in turn using RS232 cable, select device ID, select No.
of corresponding LED following above step 4), the system automatically calculates the
parameters of the processor, then select Mosaic mode. Complete parameters
configurations of other processors in this way.
Output resolution setting