VDO X1DW, Инструкция по эксплуатации

Страница: 7 / 41

X1DW VDO CYCLECOMPUTING 12
GB SLO PL JP JP PL SLO GB
www.vdocyclecomputing.com X1DW 13
mm-value inch-value
16 x 1,75
1272 50,1
20 x 1,75
1590 62,6
24 x 1 ⅜
1948 76,7
24 x 1,75
1907 75,1
26 x 1
1973 77,7
26 x 1,5
2026 79,8
26 x 1,6
2051 80,7
26 x 1,75
2070 81,5
26 x 1,9
2089 82,2
26 x 2,00
2114 83,2
26 x 2,125
2133 84,0
26 x 1 ⅜
2105 82,9
26 x ¾
1954 76,9
27 x 1 ¼
2199 86,6
28 x 1,5
2224 87,6
28 x 1,75
2268 89,3
28 x 1 ½
2265 89,2
28 x 1 ⅜
2205 86,8
30-622
2149 84,6
32-622
2174 85,6
37-622
2205 86,8
40-622
2224 87,6
How to set the tyre size by selecting the tyre:
Using go to SETTINGS/
SELECT. Confirm with M .
You are now in setting mode
(pressing
C for 3 seconds gets
you back to function mode).
Using up/down go to
WHEELSIZE/SET.
Confirm with
M .
MEASUREMENT/KMH.
Confirm with
M or to
change to MPH.
WHEELSIZE/BIKE 1 (use to
go to setting for bike 2).
Confirm with
M .
WHEELSIZE/ TYRE SELECT.
Confirm with
M .
TYRE SELECT/SELECT.
Now select your tyres using
. Confirm with
M .
The confirmation question appears “Tyresize“/
SELECT OK? When the displayed tyre size matches
the one you want, confirm with
M .
The display confirms WHEELSIZE/SET DONE
Automatic return to SETTINGS/SELECT.
5.2.2 Setting using wheel circumference >>> P07
To enter the wheel size manually, you must first
measure the wheel roll circumference on your bike.
Measuring wheel roll circumferences:
step 1 Precisely align valve on the front wheel
vertically to the ground.
step 2 Mark this spot on the ground with a line
(e.g. chalk).
step 3 Push the bike forwards one turn of the
wheel until the valve is vertical to the ground
again.
step 4 Also mark this spot on the ground.
step 5 Measure the distance between the two
marks.That is your wheel circumference
(=roll circumference).
step 6 Enter the wheel circumference measured
in this way into your VDO computer.
ATTENTION: If you have selected KMH display,
you must enter the wheel circumference in mm
(If MPH display is selected, enter the wheel
circumference in inches).
How to set the wheel size manually:
Using go to SETTINGS/
SELECT. Confirm with M
You are now in setting mode
(pressing
C for 3 seconds gets
you back to function mode)
Using go to WHEELSIZE/
SET. Confirm with M .
MEASUREMENT/KMH.
Confirm with
M or to
change to MPH.
WHEELSIZE/BIKE 1.
(use
to go to setting for
bike 2) Confirm with M .
Using go to
WHEEL-SIZE/MANUAL SET.
Confirm with
M .