01/14
1-10
6
19
GB
INSTALLATION INSTRUCTIONS: Viewline 85 mm
TU00-0752-5807102
Technische Änderungen vorbehalten - Technical details subject to change
TU00-0752-5807102
Tachometer
Operation
Basics: Press the key briefly (< 2sec.) to change the currently displayed value.
Press the key longer (> 2sec.) to change to the next value.
The display returns to normal operating mode if a key is not pressed for 30 seconds.
Any settings you have made are not saved.
Startup
1. Setting the impulse number
1. Activate T. 30 (8-pin - Pin1)
2. Deactivate T. 15 (8-pin - Pin4)
3. Press and hold Config key (14-pin - Pin 11)
Activate T. 15
Release Config key
Press and hold Config key
Set impulse number is displayed, the first digit flashes.
Press Config key briefly
The flashing digit increases by 1. If the flashing digit is “9”, the display returns to
“0”
Press and hold Config key
The next lower digit flashes
Press Config key briefly
The flashing digit increases by 1. If the flashing digit is “9”, the display returns to
“0”
Continue until the complete impulse number is set
Press and hold Config key
Deactivate T. 15. This saves the impulse number in the display.
