![background image](http://html1.mh-extra.com/html/vdo/tpms-go/tpms-go_user-manual_3722906028.webp)
UM-HV1-13-11
VDO TPMS GO user guide
Page 26/32
MISCELLANEOUS
1. CHARGE
Low Battery Indication
Your
TPMS TOOL
incorporates a low battery
detection circuit. Battery life is an average of 400
sensor
tests
per
battery
full
charge
(approximately 80-100 cars).
A full charge takes about 6 hours.
BATTERY
LEVEL
When battery is low, the battery screen is
flashing with the message "
LOW
".
The power button my also be pressed and held
for a second to display battery status.
BATTERY
LEVEL
LOW
Battery Charging
Fig. 6
When the battery is low, the “status bar” appears every 10 seconds. The display turns off
when the battery loses power.
Plug the USB cable between the tool and the charger adapter, and then plug the charger
adapter to an appropriate outlet. The red LED "
CHARGE
" light will turn on.
It’s not recommended to use the tool with low
battery status as the transmission and emission
may not be reliable.
Once charged, the bar graph is full and the LED
"
CHARGE
" turns to green light.
BATTERY
LEVEL
Battery replacement
The tool must be returned to the factory for battery replacement.
Opening the tool or tampering with the seal placed on the tool will void the
warranty.
USB Power
supply connector
Содержание TPMS Go
Страница 1: ...VDO TPMS Go User manual 24 2018 EN...