VDO SmartTerminal, Руководство по эксплуатации, Страница: 35 / 76

User Manual VDO SmartTerminal
Terminals VDO TerminalTools
© Continental Automotive GmbH
35
USB stick Provides you with functions to prepare a USB stick for the
communication with the VDO SmartTerminal.
Usually, these functions are only used for standalone
devices or if a device can no longer be found in the net-
work.
The following functions are available:
• Prepare USB stick for download
In order to download the data from a
VDO SmartTerminal which runs in standalone mode,
you will need a USB stick. For safety reasons, you can-
not insert just any USB stick into the VDO SmartTer-
minal but only USB sticks which were prepared for the
download. After inserting a prepared USB stick, the
VDO SmartTerminal transfers any data which has not
yet been downloaded onto the USB stick.
As this data is encrypted, they still need to be entered
into the system via the VDO TerminalTools.
If the data cannot be entered into the system from the
USB stick due to a problem, it cannot be reloaded from
the terminal. However, the data can be downloaded
later via an archive download from the VDO SmartTer-
minal.
• Prepare USB stick for archive
As with function Prepare USB stick for download , this
can be used to download data from the VDO SmartTer-
minal. In contrast, only data which was already down-
loaded is transferred onto the USB stick. This may be
necessary if the USB stick has a fault after the first data
download or if it is lost or if it was simply forgotten to
enter the data via the VDO TerminalTools.
• Prepare USB stick for log download
With this command, you can download the log files from
the terminal.
These may be necessary for the search for a problem
on the VDO SmartTerminal.
• Import data from USB stick
This function allows you to import the data of a VDO
SmartTerminal which were transferred to a prepared
USB stick. Hereby, it is irrelevant if the data is normal
data or archive data.
A USB stick can contain data from several VDO
SmartTerminals. During importing, all data present on
the USB stick are transferred and assigned to the ap-
propriate terminals.
• Store configuration on USB stick
Standalone devices receive their configuration by trans-
ferring it via USB stick to the VDO SmartTerminal. Any
change of configuration must at once be transferred to a
USB stick and entered into the device.
This function may also be necessary if the device is no
longer found in the network.