VDO Ocean Link, Руководство по эксплуатации

Страница: 30 / 92

Sensors calibration
Calibration types
Analog sensors calibration can be:
l
standard: for VDO sensors only. The type of sensor is set and the device reads the sensor value
with good approximation without requiring calibration.
l
manually: for non VDO sensors or to obtain more accurate indication from a VDO sensor. A three
step procedure instructs the system to read the sensor value.
Starting calibration
To start calibration, select the Do sens. calibration setting and then Yes : the Set default cal setting
appears. Running the required calibration procedure.
Running standard calibration
1. In Set default cal , select Yes .
2. Scroll the possible values and select the required one: the selected value blinks once.
3. To confirm changes, in
Save changes , select Yes : a message confirms that calibration settings
have changed.
Running manual calibration
1. In Set default cal , select No .
2. Run the operation displayed on the first row on the display.
3. Select
No : the device reads the sensor value and updates the last row on the display with the value
read.
4. If the value read is correct, select Yes : the cursor moves on to the next calibration point. Otherwise
select No to take another reading and obtain a correct value.
5. Repeat steps 2-3-4 for the other two calibration points.
6. To confirm changes, in
Save changes , select Yes : a message confirms that calibration settings
have changed.
30 Tachometer | Operating instruction v. 1.0 | A2C15587700 | 05-2017 | © 2017 Continental Automotive Switzerland AG