VDO Ocean Line WIND, Инструкция по установке и эксплуатации

Страница: 16 / 23

35
INSTALLATION
Installing the mast cable
Do not sharply bend the mast cable. Avoid chafing.
Shorten the mast cable to a length of the mast length plus 2 m. Place the
strain relief at the point where the cable enters the mast from the top.
Use existing empty tubes to protect the mast cable (e.g. from chafing of
the rakes), and install it with the mast down if possible.
Install the other end of the mast cable from the indicating instrument to
the connecting socket at the foot of the mast.
Installing the connecting socket
Install the cable socket below deck at the foot of the mast as shown.
The socket must be protected against water damage. Make all screw
connections with care. The cables shall leave the socket downward.
Connect the 8 wires at both cable ends according to the following table,
using the 6-channel terminal board:
Terminal 1 red and pink
Terminal 2 brown
Terminal 3 grey
Terminal 4 yellow
Terminal 5 white
Terminal 6 blue and green
olwind_e.qxd 21.06.99 13:35 Seite 35