VDO MS 4200 Скачать руководство пользователя страница 57

Страница: 57 / 67

Store car position

Would you like to store a favourite restaurant in the destination memory? You can
store your current car position as follows:

☞

Select “

Store current loc.

“ in the address manager.

The name input menu appears.

☞

Enter a name or cancel the name input with

The current vehicle location is stored as an address.

You can also store the car position on information screen “

i1 Car position

“, see

page 52.

Deleting list of last destinations

☞

Select “

Delete last dest.

“ in the address manager.

The list of destinations last used for guidance is displayed.

Comments:

30 entries is the guaranteed minimum of entries for the address book. This total can
be up to 200, depending on the data entered (e.g. with or without a name, etc.)
If there is no address in the address book, option “

Delete address

“ cannot be selected.

If no via points were entered for the current destination, option “

Delete via

points

“ cannot be selected.

Once the address book is full, options “

Store address

“ and “

Store current loc.

“

are no longer selectable.

NAVIGATION

English

Содержание MS 4200




































































Результаты поиска

Содержание MS 4200

Отзывы:

Бренды по названию

Популярные бренды

VDO MS 4200, Руководство пользователя

Результаты поиска

Содержание MS 4200

Отзывы:

Бренды по названию

Популярные бренды