![background image](http://html1.mh-extra.com/html/vdo/ms-4200-rs/ms-4200-rs_owners-manual_3729499006.webp)
New functions
The new operating software for your navigation system provides a number of new or
expanded functions:
■
Improved guidance
Improved visual and audible turn-off prompts thanks to additional symbols and
optimised voice-output characteristics.
■
Improved “Alternative route”
The settings range for planning an alterative route has been improved from only 10
km to up to 50 km.
■
Expanded Route & Sound function
What is meant here is destination input without a map CD. If the new destination is
within the range of the map section (corridor) stored in the main memory, it is
possible to enter a new destination without the map CD.
What is meant by “corridor” ?
The navigation system plans a route and then loads a “belt” of some kilometres
around the planned route (the corridor) as map data from the map CD into the main
memory.
Functional restrictions in corridor mode
Please note that some navigation system functions are not or only partially available
when the map CD (corridor mode) is not inserted.
In this event, the menu options appear grey (e.g. Alternative route, Route selection,
Traffic info away from the planned route).
It is only possible to load stored addresses if they are located within the corridor.
Route planning is only possible with roads located within the corridor. Even if a
destination address is located within the corridor and can be entered as a destination,
it may not be possible to plan a route to that destination. In this case, please insert the
map CD.
TMC traffic information is only available for the stored map section and with the “On
the route” option available.
Travel info and POIs can only be called up using the map CD.
Some C-IQ functions (in particular code entry) are only possible when the map CD is
inserted.
✎
As soon as you insert the map CD, these functions are available again.
Leaving the corridor
If you drive out of the corridor, e.g. do not follow the planned route, the navigation
system will attempt to guide you back into the corridor. The directional arrow and the
distance to the planned route will be displayed.
If you continue travelling away from the corridor (more than approx. 3 km), the
navigation system will display only the directional arrow and the distance to the
destination.
In this case, please insert the map CD so that the navigation system can plan a new
route to your destination.
■
Convenient resumption of guidance
Following a short stopover (ignition off) the navigation radio can continue the
previous guidance upon request.
NEW OPERATING SOFTWARE MO 4254
4
Содержание MS 4200 RS
Страница 74: ...72...