IMPORTANT INFORMATION
A
The unit must only be installed by trained personnel.
A
Observe automotive industry quality standards and the relevant local statutory regulations.
It is essential to observe the following when installing components in the passenger
compartment:
A
Ensure that the driver has a clear all-round view.
A
Increased risk of injury in the event of an accident. Do not install components in the inflation
range of the airbag or in areas where the head may knock against them.
A
Do not damage safety system wiring (airbag etc.). (Lines are normally specially marked, for
example by labels).
A
In order to ensure perfect installation, use only the original components supplied. The use of
non-authorised components may result in malfunction.
A
Do not install the unit in positions where it is exposed to high temperatures, dust, dirt or
excessive vibration (e.g. due to direct sunlight or heating vents).
Scope of delivery
Check the scope of delivery for completeness before starting work. The complete installation
kit contains:
1
MM 5200 monitor
1
6 m connecting cable
1
monitor holder
1
rubber base
2
self-tapping screws
1
double-sided adhesive strip
1
Mounting and operating instructions
Report faulty components to the Service department and notify any damage to the deliverer
(forwarder, package service, post office).
Technical data, design and scope of delivery may vary slightly due to product updating.
INSTALLATION
4
