9
M2 WL
Sleep mode and wireless receiver
If you take a break and the
M2 WL is still in the handlebar
bracket
the computer switches to
standby mode
after
five
minutes
.
The wireless receiver is still
ON
.
This can be seen from the
flashing antenna icon
.
If you now set off cycling again, the auto-start function is
used. The VDO M2 WL instantly switches back to the function
mode. The current speed is once again displayed.
This can
take up to eight seconds
.
If you take a break for
more than two hours
,
the wireless receiver switches off to save the battery.
You can see from the display if this has happened –
the flashing antenna icon no longer appears.
You must press a button before setting off again.
Once a button has been pressed, the receiver is once again
activated. You can now set off again.
If you remove the VDO M2 WL
from the bracket
,
the
wireless receiver is immediately switched off
and
the computer switches to sleep mode after five minutes.
