background image

25

Contents 

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
for maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

The VDO Depth Sounder. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
System components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

The functions of the VDO Depth Sounder. . . . . . . . . . . . . . 32

Basic calibration of the VDO Depth Sounder . . . . . . . . . . . 33
Selection of the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting the keel depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting and activating the shallow water alarm . . . . . . . . . . . . 34

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Maintenance of the VDO Depth Sounder . . . . . . . . . . . . . . 37

Installation of the VDO Depth Sounder system . . . . . . . . . 37
Installation of the indicating unit . . . . . . . . . . . . . . . . . . . . . . . 37
Installation of the Depth Sounder . . . . . . . . . . . . . . . . . . . . . . 39

for internal installation . . . . . . . . . . . . . . . . . . . . . . . . . . 40
for through-hull installation . . . . . . . . . . . . . . . . . . . . . . . 42

Electrical installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
System power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Connection of a repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Circuit diagram legend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cable lengths. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

CONTENTS

echo_e.qxd  16.04.1998 08:15  Seite 1

Содержание DEPTH SOUNDER


























Отзывы: