manualshive.com logo in svg

VDO DEPTH SOUNDER, Руководство пользователя

Поделиться
Скачать
VDO DEPTH SOUNDER Скачать руководство пользователя страница 17

40

Installation of the echo sounder: internal installation

An internal installation of the echo sounder is only possible on ships with
a fiberglass reinforced hull. This does not apply to fiberglass sandwich
hulls.
Due to signal damping the internal installation may cause power losses,
and is prone to more disturbances.  Check that the location of the instal-
lation has no air inclusions in the laminate, and that the hull material
thickness does not exceed 12 mm.

The ship must be in the water during the search for the 
optimum echo sounder location.

Proceed as follows in your search:
Supply the indicating instrument with power per wiring diagram (see
page 44) and connect it to the echo sounder.
Put the sender in a plastic bag filled with water and move it over the hull
until you obtain a stable depth reading.

INSTALLATION

Installation on powerboats:

Depth sending unit

First Stringer

Find the installation location:

Fiberglass
reinforced
resin

echo_e.qxd  16.04.1998 08:21  Seite 16

Содержание DEPTH SOUNDER


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды