![background image](http://html.mh-extra.com/html/vdo/ctc-ii/ctc-ii_operating-instructions-manual_858229008.webp)
For your safety
General safety instructions
8
1.2
General safety instructions
The basic requirement for working safely with the test device
and its components is a thorough knowledge of the general
instructions, the safety instructions and the safety regulations.
In addition to these Operating Instructions, your own
country's valid and binding accident prevention rules and
regulations and the recognised technical and professional
rules for safe and professional working must also be
adhered to.
◄
Important
Danger of explosion!
The CTC II may not be operated in areas which may be
endangered by explosions!
Do not use the test device near flammable liquids or
gases!
◄
Caution
Danger of accidents!
While working with the device, adhere to the relevant trade
association's safety and accident prevention regulations.
The power supply must be switched off when maintenance
work is being carried out!
◄
Caution
Accident danger - rolling road test stand!
Work on the rolling road may only be carried out when the
Roller Interface Module is switched off!
Remove the key to prevent anyone switching on the Roller
Interface Module accidentally.
◄
Caution