II
• E
01
/2
00
9
51
Device testing
Creating a test chart (MTCO 1324, SE2400)
7.4
Creating a test chart (MTCO 1324, SE2400)
In the case of the MTCO 1324 and the SE2400, you must
create a test chart for every test, in order to document the
correct functioning of the tachograph system.
When you have created the test chart, the following
recordings can be seen on the tachograph charts for Driver 1
and Driver 2:
If used in other countries, please adhere to the relevant legal
regulations!
◄
Important
1
Press
to start the "Test device" menu.
The CTC II reads the tachograph type and the K value.
2
Enter the upper limit of the measuring range.
Follow the test steps in the following table.
Fig.
5: Automatically created test chart
Driver 2
Driver 1
MTCO 1324:
Fully automatic, i. e. the CTC II sets the time
groups automatically.
SE2400:
Semi-automatic, i. e. the CTC II emits an acoustic
tone ( ) to prompt you to set the time groups, then continue
the program.
◄
Important