5
* Depending on version
Optional connections: (fig. 2)
• SMART Volume: Intelligent volume control
which automatically adjust the volume
depending on your car's speed.
• C o n n e c t p i n A 1 t o a s i g n a l f r o m t h e
speedometer of your car. Some cars are
already prepared for it (e.g. certain VW &
Vauxhall/Opel cars), please consult your
dealer.
- To activate the SMART volume function, see
SPECIAL FUNCTIONS, page 11.
• Electronic antenna/Motorised antenna
:
Connect pin A5 to the power supply for an
electronic antenna or the control wire for the
relay of an automatic motorised antenna.
Do not use this connection for the supply
lead of the aerial motor!
CONNECTOR B (fig.3)
Loudspeakers (use 4 ohm loudspeakers
only)
• Do not connect any of the loudspeaker leads
to earth or directly to a booster/amplifier without
high level input or via an external fader! You
can connect the loudspeaker leads directly to
an amplifier with high level input.
• Connecting 4 loudspeakers:
Front
Rear
Left+
B5
B7
Left-
B6
B8
Right+
B3
B1
Right-
B4
B2
CONNECTOR C1
Connector C1 for Pre-out* (fig. 4)
• Connect a power amplifier (with 2 additional
loudspeaker) to this set with the RCA cable.
- Connect Red socket to Right channel and white
socket to Left channel.
- Connect Blue wire to Amplifier Remote on/off.
Connector C2 (fig. 5)
Steering wheel remote control
You can connect certain car steering wheel
mounted remote control to this set via an interface.
Please consult your dealer for the correct
interface.
Wire of Telephone Mute
• If your car telephone or the car kit of your mobile
phone provides a mute signal, it can be used to
automatically interrupt the set's sound output.
- Connect the telephone mute wire to the Pink
lead wire.
- See 'SAM' (page 13); select option 'TEL' and
set 'MUTE LO' or MUTE HI' (according to
phone type) to automatically interrupt the set's
sound output when using your car phone.
Connector C3 for our analogue CD
changer* or an Auxiliary equipment*.
(available separately)
• You can connect our analogue CD changer to
this set (fig. 6)
- Select option 'AUX-ON' in 'SAM' (page 13).
• You can connect the audio output of auxiliary
equipment e.g. in-car video system (instead of
a CD changer) to this set (fig.7) using a
separate accessory cable.
- Select option 'AUX ON' in 'SAM' (page 13).
OTHERS CONNECTIONS (fig. 8)
D1 Telephone in* (fig.8)
• You can connect our hands-free phone kit
(available separately) via the connector D. See
mounting and connecting instructions for the
hands-free kit.
- Select option 'HFREE' and set 'HFREE LO' or
'HFREE HI' (according to phone type) in 'SAM'
(page 13) to automatically interrupt the set's
sound output when receiving ot making a phone
call.
D3 External Remote Display (fig. 8)
• You can show the content of headunit on a
specific car remote display via connector D3.
Contact your dealer for an 'EDI Box' of the
specific car which is sold separately.
Ｅｎｇｌｉｓｈ＿ＢＬ－ＦＤ＿ｎｏＷＭＡ．ｐ６５
2004-12-2, 9:06
5
