12
* Depending on version
SPECIAL FUNCTIONS
Setting the clock (manually)
• See 'SAM' (page13), option 'CLOCK'.
Note:
You can select 12 hour or 24 hour clock display.
• See 'SAM' (page 13), option 'CLOCKSET'.
RDS clock (auto update)
You can select an automatic update of the clock
via the RDS radio signal.
• See 'SAM' (page 13), option 'CLOCK'.
- The transmitted time via RDS can be incorrect.
Smart volume (Speed Dependent Volume
Control)
See 'INSTALLATION' (page 5) for connection
instructions.
To compensate for surrounding noise, this
function automatically increase the volume of the
set with respect to the car's speed. Four
compensation levels can be selected. Level 1
gives a small increase while level 4 gives a greater
increase. See 'SAM' (page 5) option 'S-VOL' to
select the level until you find one which suits your
car.
Setting the service reminder
• See 'SAM' option 'SERIVCE' (PAGE13).
FAST REWIND / FAST FORWARD (
or
)
• Long press the
or
button for more than
2 seconds to quickly move rewind or forward
through the disc.
- Normal playback resumes when you release
the button.
RANDOM TRACK PLAYBACK
• Press RND to activate/deactivate Random
track playback.
REPEAT TRACK
• Press RPT to activate/deactivate Repeat
current track.
SCAN TRACK
The scan function enables you to listen to the
first few seconds of each track.
• Press SCN to activate/deactivate Scan track.
• P r e s s or
to start the scanning.
Note: You can select how many seconds each
track is scanned, see 'SAM' (page 14); option
'SCANTIME'.
DISC EJECT (CD PLAYER)
• Press to eject the disc.
You can select the service distance unit
• See 'SAM', option 'UINT' (PAGE13).
You can select the inteval distance of service
• See 'SAM', option 'INT' (page 13) to select the
right interval distance.
You can select the service even.
• See 'SAM', option 'EVENT' (page 13) to select
the reminder event you want.
Note:
- 'SERVICE' function is only valid when car speed
calibrated.
Speed warning
You can set a safety speed, when your drive
speed is faster than your setting safety speed,
the radio will remind you. See 'SAM', option 'SPD'
(PAGE13) to set your safety speed.
Note:
- This function is only valid when car speed
calibrated.
To calibrate:
To avoid unnecessary distraction we advise
that this procedure is carried out with the
help of somebody else.
1 While stationary, hold down the
key and
SOUND key at the same time.
2 The set mutes.
Display shows 'RECALIB' and '50KM/H' (30
MPH) alternately.
3 Now drive to 50 KM/H (30 MPH).
Always obey the highway code and current
traffic restrictions and conditions!
4 Once 50KM/H (30 MPH) is reached, press
SAM key. You hear a beep and display shows
'CALIB OK'.
5 Now turn the set off and then on again to return
to normal operation. Level 2 is chosen for S-
VOL in 'SAM'.