5
Movement
Stepper motor
Installation diameter [mm]
Central instrument 80, 85, 100, satellite instruments 52, 80, 100
Lighting
Backlight, LED, standard white
Protection
IP65 IEC 60.529 from front
Lens
Glass, coated
Bezel
Plastic, black, triangular profile as standard
Future options: triangular profile in chrome and round profile in black
Plug
Central instrument: 4 PIN Mate-N-Lok and 26 PIN MODU II
Satellite instruments: 6 PIN Mate-N-Lok
Display angle
Approx. 210 ° for the central instrument, 240 ° for other display instruments
Warning light
In each satellite instrument
CAN inputs
2 × (e. g., SAE J1939, CAN open)
Frequency inputs
1 × Hall, 1 × universal
Analogue inputs
3 × resistive, 1 × 4 – 20 mA, 1 × 0 – 5 volt
Outputs
2 × switched outputs 0.5 A
Operating voltage
12 – 24 volt (min. 10,5 volt, max. 32 volt)
Installation angle
Any for central instrument, 0–85 ° for satellite instruments
Operating temperature
– 40 to + 85 °C, limitated LCD readability beyond – 20 °C and + 70 °C
Storage temperature
– 40 to + 85 °C
Technical data
For further information about VDO visit the website at www.vdo.com.
Complex configuration
Sample requirement:
Rigorous safety requirements and different vehicle de-
ployment scenarios (construction sites and public
roads) often require complex configurations. One ex-
ample is a mobile crane, the central instrument of
which is to be hooked up to manage nine more instru-
ments. All data comes from analogue sensors and
frequency sensors via a CAN bus.
CANcockpit provides the solution:
CANcockpit can cover even this complex configuration
with ease. The instruments are connected and set,
allowing a wide range of physical engine data to be dis-
played at all times, as well as e. g., hydraulic data
(CAN open). For you, this means maximum choice
when it comes to putting together the required
display instruments.
