VDO AcquaLink, Руководство по установке

Страница: 6 / 20

For the installation only use VDO or NMEA approved cables.
If you don’t use standard cables, the wires used should be adequately
insulated or should have sufficient electrical strength, and the contact point
should be protected against e lectrical shock hazard. The electrical conducting
components of the connected consuming devices should also be protected
against direct c ontact through suitable measures. Installation of bare metallic
wires and contacts is not allowed.
Take account of the wire cross section. A reduction of the wire cross section
results in a higher current density. This can cause the wire to heat up and
potentially cause fire.
Connect the wires only in accordance with the wiring diagram.
Safety Instructions for Maintenance
The 110mm gauge is maintenance-free. Do not use cleaning agents.
Repairs on the gauge should be carried out only by VDO authorized
specialists
6