background image

GB

7

For theft protection this set is provided with the following security features:

DETACHABLE FRONT

Take the detachable front with you when leaving the car if not, the set will emit a warning
beep 10 seconds after the removal of the ignition key as a reminder. Keep it in its protective
cover. Always replace the detachable front before starting to drive. If the front is left flapped
down warning beeps will be heard.

• REMOVING THE FRONT

Open the front.

Push the button in the direction
of the arrow as shown.

Remove the front.

• REPLACING THE FRONT

Push the front until it clicks into position.

To ensure good connection between the set and the 
detachable part, it is advisable to clean the connectors
with a cotton swab from time to time.

SECURITY LIGHT

When the car ignition is switched off and the detachable front is removed, the red light flashes.

• You can switch off the flashing warning light. See ‘INITIAL SETTINGS’, option ‘LED’.

SECURITY WARNING STICKERS

• Stick the supplied ‘Security’ warning stickers on your car windows.

IDENTIFICATION NUMBER

This set has a unique identification number stated on the ‘Security card’ (see separate installation
card). This ‘Security card’ is required as proof of ownership when the set is stolen, when the
detachable front is lost or when requesting service.

Do not keep the ‘Security card’ in your car.

1

3

2

1

SECURITY

1

EJECT

3

2

1

EJECT

RC749/849 GB  15/06/99  11:24  Page 7

Содержание 3300

























Отзывы: