VDH PROBA 50, Руководство пользователя

Страница: 9 / 26

VDH Products BV Document 951573 - Version 1.3 Blad: 9 of 26
By simultaneously pressing the DAY -key and the UP - or DOWN -
key, another day can be selected. The setpoint for this day will
appear in the setpoint display.
Using the UP - and DOWN -keys the setpoint can be changed.
Press the SETPOINT -key to exit the setting.
2.1.6 Standby
In the STANDBY mode the PROBA 50 will regulate for unlimited time on a
fixed setpoint temperature in the ripening room.
This STANDBY mode for example can be used if products other than
bananas are stored in the ripening room.
Make sure the LED above the KEY button is on.
Press the STANDBY key to switch to the STANDBY mode. The LED above
the STANDBY key will light.
Now the temperature will be regulated for an unlimited time on the last
programmed
STANDBY setpoint.
The setpoint can be adjusted as described in chapter '2.1.5. Changing the
temperature setpoint' (see page 8).
By pressing the STANDBY key once more, the STANDBY mode is switched
off.
The temperature regulation will stop, the ripening room will not be kept at a
constant temperature. Also the
STANDBY LED will not illuminated.
2.1.7 Starting and stopping the gassing
It is possible to stop the gasification during a gassing period.
Make sure the LED above the KEY button is on.
Press the GAS key.
The display shows the text 'GAS' and 'StOP'.
If gasification is not to be stopped, press the GAS key. The average
temperature shows in the display again.
Press the SET key to stop the gasification period. The LED GAS will
extinguish to indicate that gasification has stopped.
During the ripening program it is possible to insert (once again) a gassing
period.