VDH MC3-SC, Руководство пользователя

Страница: 6 / 45

MC3-SC Stepped Controller
Document no.: 140744 version 1.3
Page 6 of 45
-
Turning the controller on
The controller can be turned on using the power button at the bottom right of the screen. If
the controller settings require a password for modifications, this will first be checked.
-
Changing the communication settings
The communication between the touch panel and the controller uses TCP/IP. This means
that both the controller and the touchscreen must have IP addresses. By default, this is
192.168.100.1 for the controller and 192.168.100.101 for the touch panel.
The touch panel has to be told where to find the controller. This can be done by touching
the text “MC3-SC” (in the middle of the screen) and holding for 10 seconds. The following
screen then appears.
Changing the blue numbers lets you tell the touch panel the controller’s IP address if it has
been changed. Underneath, for information purposes only, is the IP address of the touch
panel.
The IP address of the panel can be changed as follows:
-
hold your finger on a grey part of the startup screen for 5 seconds (e.g. above the
“MC3-SC” text)
-
a popup menu appears; select the “Show System Settings” option here
-
press the “Back” button (at the bottom of the screen) twice
-
a box showing the text “Network” in blue can now be seen
-
click this and alter the network settings
-
click “OK” and the cross at the top right of the screen