7
Maintenance
Risk of
electric shock
!
DO NOT OPEN!
No user-serviceable parts inside!
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electric shock, fire, or personal injury
.
Electrical and Moving Parts:
•
The fan motors are lubricated at the factory and will not require lubrication.
•
Electrical components are integrated in the fireplace and are not serviceable by the consumer.
Storage:
•
Store heater in a clean dry place when not in use.
Light Bulb Inspection and Replacement:
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electric shock, fire, or personal injury
.
The flame effect is created by two 40-Watt E-12 (small socket base) light bulbs. Use only the same
type of bulb as replacements. If the flame effect does not work, the bulbs may have come loose or
been damaged during shipping.
Light bulbs become very hot during use. Allow at least 10 minutes for the bulbs to
cool before touching.
•
Turn power to off and unplug insert from electrical outlet before changing light bulbs
•
Slide fireplace mantel away from wall to gain access to back of fireplace. Locate access panel
on back of insert.
•
Using a Phillips screwdriver, remove screws in access panel.
•
Open door and replace light bulbs as necessary. It is recommended that both light bulbs be
replaced at the same time.
•
Close access panel and tighten screws with Phillips screwdriver.
NOTE: We do not supply replacement bulbs. They may be found at home centers or hardware stores.
