6
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
CARE AND MAINTENANCE
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature (212
°
F / 100
°
C), the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
3.
Wait 15 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
5. With the POWER switch in the OFF position, plug the power cord back into the outlet.
6. If it switches off again,
UNPLUG THE HEATER RIGHT AWAY!
Have the outlets, wiring, and
breaker box inspected by a professional. Make necessary repairs before using the heater.
Cleaning
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electric shock, fire, or personal injury
.
NEVER immerse in water or spray with water. Doing so could result in electric
shock, fire, or personal injury.
Metal:
•
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
•
DO NOT
use brass polish or household cleaners as these products will damage the metal trim.
Glass:
•
Use a good quality glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
•
NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
Vents:
•
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
•
Clean the exterior of the fireplace with a slightly damp cloth or duster.
Wood:
•
NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
•
Clean the exterior of the fireplace with a slightly damp cloth or duster.
